What Affects RFID Inventory Accuracy in Apparel Stores?
Nov 20, 2026
A store expects 100 garments in Zone A. During stocktaking, an employee uses a handheld RFID reader and detects 100 unique tags. The total looks right. But two of those tags belong to jackets on the returns rack in Zone B. Which two garments in Zone A are still unaccounted for?
An apparel stocktake needs to answer three questions. Did the reader detect the garments in the area? Does each detected garment belong in this count? And does its tag match the correct style, colour and size?
Quick Answer: What Affects RFID Inventory Accuracy?
Factor
What affects the result
What to verify
Tag detection
Tag condition and placement, garment arrangement, reader settings and the employee’s scanning route
Which expected garments did the reader detect on the first pass?
Counting area and timing
Nearby racks, fitting-room items, sales, returns and transfers during the count
Which garments belonged in the area at the agreed count time?
Product and inventory records
The link between each tag and garment, replacement tags, repeated reads and transaction timing
Does each counted tag represent one physical garment with the correct style, colour and size?
If two errors cancel each other out, the total can look correct. Comparing individual tag identifiers reveals differences that a quantity check can hide.
1. Why Does an RFID Handheld Miss Some Garments?
An expected garment can be absent from the results because it moved, its tag is missing or damaged, or the handheld did not detect it during that pass. If staff can physically find the garment, they can narrow down the cause with a simple check: try reading it on its own, then put it back in its normal position and repeat the scan.
Tag condition and placement
Start with the garment that was missed. Is the tag still attached? Is it sharply folded or damaged? Does it sit directly against a metal zip or decorative trim? Compare it with a tag that reads reliably on the same type of garment.
If one jacket remains difficult to read on its own, inspect its tag and attachment point. If several jackets of the same style read individually but are repeatedly missed on the rail, test a different tag position and approach angle before changing settings across the store.
Folded, hanging and packaged clothing
Passive UHF RFID allows staff to identify multiple tagged garments without exposing each barcode. A rail of coats, a stack of folded T-shirts and garments packed in bags can nevertheless produce different results. Folding can bring tags close together or change their orientation. Metal fixtures, the packaging material and the position of the reader can also affect detection.
Test merchandise as employees normally find it. If moving a stack or opening a carton is necessary to finish the count, record that step. It affects how much work the store must allow for each stocktake.
Reader power and scanning coverage
Reader power affects which tags are within reach. Increasing it may help detect garments at the back of a deep shelf, while also bringing a neighbouring rail into range. Test both effects together. Choose a setting and scanning route that cover the target display while keeping unexpected reads manageable.
Also check which locations employees actually visit. If different employees consistently miss the same lower shelf, the route deserves attention. If fitting-room returns are part of the task, give that rail an explicit place in the route.
2. Why Do Garments From Another Area Appear in the Count?
An RFID read tells you that the reader detected a tag. Assigning that observation to the correct stocktake depends on the store layout, the counting boundary and the item’s movement.
Consider a returns rail beside the sales floor. If it belongs to a separate inventory area, staff should know that before they start. During a trial count, leave the rail in its usual position and check which of its tags appear. If the same tags repeatedly show up in the sales-floor count, test the handheld’s angle, distance and power along that boundary.
Timing matters just as much as distance. Suppose an employee counts a jacket at 10:05 and a customer buys it at 10:12. Comparing the earlier physical count with a stock balance taken after the sale can make the jacket appear to be an extra item. The read and the sale may both be correct.
For each stocktake, define the reference time and how staff will handle sales, returns, transfers and garments in fitting rooms. A store that stays open during counting needs a way to review movements around that time before approving an adjustment.
3. Why Can the Total Be Correct but the Size Breakdown Be Wrong?
An RFID handheld reads the tag’s identifier, commonly an Electronic Product Code (EPC). The inventory software uses the associated product record to determine which garment was counted.
Imagine a black jacket in size M carrying a tag linked to size L. The reader detects one tag and the software counts one jacket. The total is correct, but the store overstates its size L stock and understates its size M stock. The error becomes visible when a customer asks for the size the system says is available.
Three situations are especially useful to distinguish:
What happens
Likely effect on the count
The handheld reads the same EPC ten times during one session.
With deduplication by EPC, the ten observations count as one tagged garment.
Two different garments carry the same EPC.
A count based on unique EPCs can undercount the garments because both appear under one identifier.
One garment retains its old tag after a replacement tag with a different EPC is attached.
If both identifiers are detected and accepted, one physical garment can count twice.
When replacing a tag, check the physical garment and its software record together. When investigating a size discrepancy, compare the garment’s sewn-in size label, its RFID identifier and the SKU linked to that identifier.
How to Troubleshoot RFID Inventory Discrepancies
What staff observe
First check
One garment is missed on several passes.
Locate it physically, inspect the tag and test it individually beside a garment that reads reliably.
A stack counts correctly only after staff rearrange it.
Repeat the test in its original arrangement and check tag position, stack density and approach angle.
The same neighbouring items appear in every count.
Identify their physical rail, then test the scan along the boundary with both rails stocked.
The total matches, but one size is short and another is over.
Compare the garments’ physical size labels with their EPC-to-SKU records.
One physical garment appears as two items.
Check for a replacement tag and whether the old and new EPCs were both accepted.
A discrepancy appears after a sale, return or transfer.
Compare the transaction time with the physical count time and the inventory snapshot used for reconciliation.
How to Test RFID Inventory Accuracy in One Store
Choose a representative area, keep the adjacent displays stocked and agree on a count time. A rail with a nearby returns rack can reveal more about everyday performance than an isolated display.
1. Build a verified item list. Physically check each garment in the test area and record its EPC, style, colour, size and location. A list that says “ten black jackets, size M” cannot tell you which jacket was missed. Where practical, also record the EPCs on the neighbouring display so you can recognise unexpected reads.
2. Run a normal first pass. Have an employee follow the usual route with the merchandise hanging, folded or packaged as it would be during a shift. Save the unique EPCs detected before anyone rescans or rearranges stock.
3. Compare the two lists. Identify expected EPCs detected, expected EPCs still missing and unexpected EPCs detected. Check whether each exception reflects a reading issue, a garment movement or an incorrect record.
4. Record what the second pass costs. Note which garments staff recover, what action helped and how long reconciliation takes. Repeat with another employee or a different display arrangement to see whether the method is practical across shifts.
In the opening example, detecting 98 of 100 verified, expected EPCs gives a 98% first-pass expected-tag detection rate. The two EPCs from the returns rack are recorded separately as two unexpected tags. Reporting both figures preserves the information a store manager needs, even though the handheld displays 100 unique tags.
FYJ’s apparel RFID workflow combines label encoding, garment identification, handheld batch counting and inventory review. For a retailer evaluating that workflow, a useful demonstration follows one discrepancy to its resolution: select a missing garment, locate and verify it, then review how the final stocktake reflects the finding.
Frequently Asked Questions
Can RFID count folded, stacked or packaged garments?
Yes. Passive UHF RFID can identify multiple tagged garments in these arrangements. Test the actual tag position, stack density and packaging used in the store. Record first-pass results separately from items recovered after changing the angle or moving the merchandise.
Does increasing handheld reader power improve accuracy?
It can improve detection within a difficult display, but it can also bring adjacent merchandise into range. Compare the number of expected tags recovered with the number of unexpected tags introduced, using the same route and stocked displays.
What is the difference between tag detection rate and inventory accuracy?
For a defined test, the expected-tag detection rate is the number of unique expected EPCs detected divided by the number of verified expected EPCs. Inventory accuracy also considers whether the final records match the physical garments by quantity, style, colour, size, location and reference time.
Can a store achieve 100% detection in an RFID pilot?
A store can detect every expected tag in a particular test. The pilot report should state how many garments were tested, how they were displayed, whether staff needed a second pass and whether any neighbouring tags were also detected. Those details let the retailer judge how well the result represents a normal stocktake.
Read More